CONDITION OF USAGE
1.The depth for the electrical pump below the water is no more than 5m;
2.The temperature of the water is no higher of 40℃;
3.The PH figure of the water of the water is between 6.5~8.5;
4.The grain diameter of the solids in the water is no bigger than 2mm.

FUNCTION AND FEATURE
The model of pump is characterize with high heads, compact size, light weight and convenient use and vastly used inhigh position water delivery,flush and places as construction sites. The 3-phase motor pump has a more stable function, the float switch can automatically control on and off with the change of the liquid level.
The protector in the motor can automatically cut off the power when it overheated or over currented, thus guarantee the security and reliability of pump’s operation even in the atrocious environment.

MODEL ANALYSIS

PRODUCT STRUCTURE

No.	Description	No.	Description	No.	Description	No.	Description
1	Screw	14	O Ring	27	Undulated Washer	40	Impeller
2	Plug	15	Upper Screw Cap	28	Bearing	41	Bearing Sleeve
3	Screw	16	Capacitor	29	Rotor	42	O Ring
4	Cable Presser	17	Insulation Cap	30	Pin	43	Upper Pump Body
5	Spring Washer	18	"O" Ring	31	Bearing	44	Guide Vane
6	Cable Presser	19	Clamp Nut	32	Hydro-cylinder	45	Lower Pump Body
7	Cable Protector	20	Clamp Wahser	33	Mechanical Seal	46	Spring Washer
8	Cable Fixed Plate	21	Three Holes Presser	34	O Ring	47	Bolt
9	Cross Screw	22	Cross Screw	35	Pump Head	48	Base
10	Handle	23	Upper Bearing Seat	36	"O" Ring	49	Screw
11	Float Switch	24	"O" Ring	37	Outlet	50	Net
12	Screw	25	Barrel	38	Skeleton Seal	51	Filter Mesh
13	Oil Plug	26	Coil	39	Screw

TECHNICAL DATA

Model	Power		Delivery　n=2850 r/min
1-220V/240V	kw	HP	Qm³/h/i/min	0	1.0	2.0	3.0	4.0	5.0	6.0	7.0
1-220V/240V	kw	HP	Qm³/h/i/min	0	16	33	50	67	83	100	116
SPA3-30/2	0.75	1.0	H(m)	40.3	38.2	34.3	28.5	22.9	17.5	12.2	6.3
SPA3-45/3	1.1	1.5	H(m)	52.5	49.5	45.6	40.4	33.5	25.7	17.4	7.8
SPA3-65/4	_J.5	2.0	H(m)	64.5	61.7	57.4	50.3	44.0	34.6	26.4	8.9